Products

Fogger (fog sprayer, humidifier)

Excellent cooling and cold moisture production up to 80% cooling and aeration and creating a cold cloud of fluid and low water consumption using cryogenic fan and pad system and fogger system, and also allows you to reduce the temperature to 18 °C in the shortest time and provide enough moisture needed for your cultivation. It should be noted that the cryogenic system should be first checked and calculated after final selection of the type and amount of the greenhouse structure according to the requirements. Pads (cellulose and p.Y.C.) Meist. Fuger Special Nozzle High pressure hoses Controller System

Category:

greenhouse humidity increase system (fogger)

Generally, in spring and summer, the humidity in the greenhouse is lower than the standard level of plants. The misting system helps us to reach the required level of humidity in these situations. For use in greenhouses, depending on the type of operation, three low pressure, medium pressure and high pressure fogger systems are used, in low pressure systems that work with a pressure between 2 and 6 bar, the fog droplets created have an average diameter of 40 to 70 It is micron, the low far mechanism has a low initial cost and the amount of water consumed in this mechanism is very high. On the other hand, due to the high flow rate of the nozzles, this system can be used as a mechanism for increasing humidity and an auxiliary irrigation system at the same time.

All nozzles and parts of this type of fogger can be made of polyethylene. In the fogger mechanism, the average pressure of the fog drops is between 20 and 40 microns, and the system is under a working pressure of 42 bar, and the nozzles and connections are metal, to create fog with a droplet diameter of less than ten microns (average 5 microns). High pressure fogger system is used with pumps with pressure above 100 bar. The smaller the diameter of the created mist, the less the possibility of droplets forming on the plant and causing pests