Construction of plastic and tunnel greenhouses

Construction of plastic and tunnel greenhouses

 

Tunnel greenhouses


Types of tunnel greenhouses are curved from the point of connection to the ground in two forms: full curved and angled. Tunnel structures are relatively inexpensive and installed quickly and have high resistance to wind and snow and the possibility of receiving maximum sunlight. Provides for plants.

 

Price Unit

 Square meter
Price -
Description of service: -

 

Description of service:

 

Structure Name

Price (m2)

The width of each mouth.

Length

Column height

Crown Height

The distance between the side columns

 

Middle column spacing

 

Truss

Arc Interface

Studs

 Structures

Structural Accessories

 

Cover

Installable equipment

Specifications of discharge valve

Plastic Containment System

Circular Arch Pigeon Wing Structure

Call

8 m

9 m

9.60 m

Minimum 30 meters

3 m

4 m

170 to 220 cm

3 m

3 m

1-inch tube in w form

1.4 inch pipe

1.5 and 2 mm sheet

All bolts and hot dip galvanized

Electric Gearbox Actuator System

Plastic

Thickness 180micron UV 8 or 10%

Made in Iran or Turkish by order

Ventilation Fan

Circulator fan

Ability to install fans and pads

1.25 width pigeon fin with 1-meter Iranian rock

Tubular Tightener

Spanish call

8 m

8.5 m

9 m

9.6 m

30 to 60 meters 4m 1.8 m 2.5 to 3 m 3 to 5 m 1-inch tube in w form 1.4 inch pipe 1.5 and 2 mm sheet Electric Gearbox Actuator System Electric Gearbox Actuator System

Plastic

Thickness 180micron UV 8 or 10%

Made in Iran or Turkish by order

Ventilation Fan

Circulator fan

Ability to install fans and pads

1.5-width pigeon fin with 1.5-meter Spanish rock Tubular tightener and aluminum lock
Tunnel call

8 m

8.5 m

9 m

9.6 m

30 to 60 meters 3 m 1.7 m 3 m - 1-inch tube in w form 1.4 inch pipe - All bolts and hot dip galvanized Gearbox Valve Actuator System

Plastic

Thickness 180micron UV 8 or 10%

Made in Iran or Turkish by order

Ventilation Fan

Circulator fan

Ability to install fans and pads

Roll-up side valve with a width of 1.2 x 2 and during the structure Tubular tightener and aluminum lock